Coffee
← Blog Menu Bar

AWS Cost Monitoring on Mac: Check Your Bill Daily

By FavTray ·

Written by the team behind FavTray, a Mac developer dashboard for the menu bar. We check every app we cover against its own site, docs or a hands-on test, and each post says which.

Short answer: For AWS cost monitoring from the Mac menu bar, use a tool that reads the Cost Explorer API with a read-only IAM user that can only call ce:GetCostAndUsage. Keep the refresh rate low: AWS charges $0.01 per API request and updates billing data only up to three times a day. Set up free AWS Budgets alerts first.

TL;DR

  • The AWS Billing console and Cost Explorer are the free baseline, but nobody opens them daily.
  • The Cost Explorer API costs $0.01 per request, per page. Polling every 15 minutes is about $0.96 a day per query.
  • AWS Budgets alerts are free. Set one up before anything else.
  • Give any cost tool its own IAM user with only ce:GetCostAndUsage (plus forecast or anomalies if needed).
  • Google Cloud budgets alert but don’t cap spending. Use the BigQuery billing export for detailed numbers.
  • FavTray Cloud Costs shows AWS or Google Cloud spend in the menu bar for free (1 account), caps AWS at 12 requests a day, and never stores your credentials.

We make FavTray, so weigh our take accordingly. AWS and Google Cloud prices below come from their own pricing pages and docs, checked October 14, 2026.

Where can you see your AWS bill today?

AWS gives you three free places to look, all in the browser:

  1. Billing and Cost Management console: month-to-date charges and your bills.
  2. Cost Explorer: charts by service, account, region or tag. You turn it on once in the console (it can’t be enabled through the API), and AWS then prepares the current month and the previous 13 months (Enabling Cost Explorer).
  3. AWS Budgets and Cost Anomaly Detection: alerts by email or Amazon SNS.

The problem isn’t access. It’s that you have to remember to look, sign in, and click through. A forgotten NAT gateway or a test cluster left running shows up a month later on the invoice. A number in the menu bar turns that into something you notice the next morning.

What does the AWS Cost Explorer API cost?

This is the part most menu bar tools gloss over. From the Cost Explorer pricing page and FAQ:

ItemPrice
Cost Explorer API request$0.01 each, and each page of a paginated result counts as a request
Custom billing views$0.01 per source per request
Hourly granularity data$0.00000033 per usage record per day (about $0.01 per 1,000 records a month)

That sounds tiny until a tool polls on a timer. Here’s what one query costs at common refresh rates:

Refresh rateRequests a dayCost a dayCost over 30 days
Every 15 minutes96$0.96$28.80
Every hour24$0.24$7.20
12 a day12$0.12$3.60
Twice a day2$0.02$0.60

Multiply by the number of queries per refresh (total, by service, forecast) and the number of accounts.

And polling faster buys you nothing. AWS’s Cost Explorer API best practices say billing information is updated up to three times daily, and recommends a caching layer and a daily to several-times-a-day call pattern. A good cost tracker refreshes a few times a day, caches the result, and lets you refresh by hand.

How do I set up free AWS billing alerts first?

A menu bar number is for awareness. An alert is your safety net. Both are worth having, and alerts cost nothing.

AWS Budgets pricing (AWS Budgets pricing):

  • Budget monitoring and notifications are free.
  • Action-enabled budgets (which can apply a policy automatically) are free for the first two each month, then $0.10 per budget per day.
  • Budget reports are $0.01 per report delivered by email.

To create a monthly cost budget:

  1. Sign in to the AWS console and open Billing and Cost Management.
  2. In the left menu, choose Budgets, then Create budget.
  3. Pick the Monthly cost budget template, or Customize for more control.
  4. Enter an amount a bit above your normal monthly spend.
  5. Add the email addresses to notify and create the budget.

Then check Cost Anomaly Detection. AWS sets up a default monitor and a daily summary alert when you enable Cost Explorer (docs), so review where its alerts go. It uses machine learning on your spend history instead of a fixed threshold, runs about three times a day after billing data is processed, and sends alerts by email or SNS (AWS docs). AWS announced it at no cost. Because it relies on Cost Explorer data, which can lag up to 24 hours, an anomaly can take up to a day to show up.

How do I create a read-only IAM user for cost tracking?

Never give a desktop app your admin keys. Create a dedicated identity that can read costs and nothing else. If its keys ever leak, the worst case is someone seeing your bill.

The action you need is ce:GetCostAndUsage. It’s the core of AWS’s own read-only Cost Explorer policy template (AWS SAM policy templates), and the Service Authorization Reference lists it, ce:GetCostForecast and ce:GetAnomalies as Read actions. "Resource": "*" works for all three.

Minimum policy:

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Effect": "Allow",
      "Action": ["ce:GetCostAndUsage"],
      "Resource": "*"
    }
  ]
}

If your tool also shows a forecast or anomalies, add ce:GetCostForecast and ce:GetAnomalies to the Action list. Don’t use ce:*: it includes write actions such as creating anomaly monitors.

Steps:

  1. Open the IAM console › Users › Create user. Name it something like cost-readonly. Don’t give it console access.
  2. Choose Attach policies directly › Create policy, switch to JSON, paste the policy above, and save it as CostExplorerReadOnly.
  3. Attach that policy to the user, and nothing else.
  4. Open the user, go to Security credentials › Create access key, and choose the CLI use case.
  5. On your Mac, store the key in its own profile (this writes to ~/.aws/credentials and ~/.aws/config):
aws configure --profile cost-readonly
  1. Test it. This is read-only, but it is one billed API request ($0.01):
aws ce get-cost-and-usage \
  --time-period Start=2026-10-01,End=2026-10-14 \
  --granularity MONTHLY \
  --metrics UnblendedCost \
  --profile cost-readonly

Change the dates to the current month. The End date is exclusive.

If you get AccessDenied even with the policy attached, check two things. In an AWS Organization, the management account controls whether member accounts can see Cost Explorer data. And for IAM access to billing in the console, the account’s IAM user and role access to billing information setting must be activated (AWS re:Post).

How do I track Google Cloud costs from a Mac?

Google Cloud works differently, and two facts matter.

Budgets alert, they don’t stop spending. Google’s budgets docs say an alerts-only budget “doesn’t automatically cap” usage or spending. By default it alerts at 50%, 90% and 100% of the amount, by email and optionally Pub/Sub. A new budget can take several hours before its first notification. Set one up in Billing › Budgets & alerts › Create budget anyway: it’s the GCP equivalent of the AWS step above.

Detailed numbers come from the BigQuery billing export. Turn it on in Billing › Billing export. According to Google’s export docs:

  • Data is exported automatically throughout the day.
  • With a US or EU multi-region dataset, the first export backfills from the start of the previous month. A single-region dataset only collects data from the day you enable it.
  • Loading is free, but you pay BigQuery for the data each query reads, so preview a query’s cost before running it.

Reading the export needs permission to run BigQuery jobs and read the dataset, for example BigQuery Job User on the project and BigQuery Data Viewer on the dataset (BigQuery roles); a project owner has both. You sign in with:

gcloud auth login

How does FavTray show cloud costs in the menu bar?

FavTray is a menu bar toolkit for Mac, and Cloud Costs is the tool that does what this post describes.

AWS:

  • Reads the profiles in ~/.aws/credentials and signs Cost Explorer requests itself with SigV4. Point it at the cost-readonly profile from above.
  • Opt-in, with a hard guard of 12 Cost Explorer requests a day on every plan, because each request costs you $0.01. That’s at most $0.12 a day.

Google Cloud:

  • Reads your BigQuery billing export, with every query capped at 100 MB billed, and refreshes every 6 hours or when you ask.
  • Shows cost minus credits in your billing currency, compares with the same days last month, and adds a forecast clearly labelled as FavTray’s own. Also a daily chart by service, top SKUs, your budgets, and savings suggestions from Google’s Recommender (FavTray never turns that API on for you).

Both:

  • Top services by cost, so you see what’s driving the number.
  • Credentials are never stored by FavTray. It reuses what your AWS CLI and gcloud already have, holds them in memory while it refreshes, and calls AWS and Google directly. No FavTray server is involved.

Not great:

  • No Azure.
  • Google Cloud needs the BigQuery billing export turned on and a signed-in gcloud.
  • It’s a viewer. Alerts that wake you up at night should still be AWS Budgets and GCP budgets.

Price: free for 1 cloud account (AWS or Google Cloud). Pro connects every account, so AWS and GCP show side by side, for $4.99 once for one Mac. There’s a 7-day full trial with no card, and an account connected during the trial keeps refreshing afterwards. macOS 14 Sonoma or later.

What’s the safest setup overall?

  1. Turn on alerts: an AWS Budget and Cost Anomaly Detection, and a GCP budget. Free, and they work when your Mac is asleep.
  2. Create a read-only identity: an IAM user with only ce:GetCostAndUsage (plus forecast or anomalies if needed).
  3. Pick a tracker that respects the API price: a few refreshes a day, cached, with a manual refresh.
  4. Glance daily. A menu bar number you see every morning catches the forgotten instance weeks before the invoice does.

If you also pay for AI APIs, the same idea applies: see tracking AI API costs without a cloud service. For other things worth keeping in view, see our list of menu bar apps for developers and, for a different style of glanceable info, the best widgets for Mac.

To connect every AWS and Google Cloud account in FavTray, Pro is a one-time $4.99. See the pricing page.

Try FavTray Free

One free Mac menu bar app: notch island, ports, keep-awake, clipboard, eye rest, and Claude and Codex limits.

Download Free

Frequently Asked Questions

How much does the AWS Cost Explorer API cost?

AWS charges $0.01 per Cost Explorer API request, and if a result is paginated, each page counts as a separate request. Hourly granularity is billed separately. A tool that refreshes every 15 minutes makes 96 requests a day, about $0.96 a day per query, so check how often any cost tracker calls the API before you connect it.

What IAM permission do I need to read AWS costs?

The minimum is ce:GetCostAndUsage on Resource "*", which lets a user read cost and usage data through the Cost Explorer API. Add ce:GetCostForecast if your tool shows a forecast and ce:GetAnomalies for Cost Anomaly Detection results. Put them on a dedicated IAM user or role with nothing else, so leaked keys can only read your bill.

Are AWS Budgets free?

Budget monitoring and notifications are free. Action-enabled budgets, which can apply an IAM or SCP policy when a threshold is hit, are free for the first two each month, then $0.10 per budget per day. Budget reports cost $0.01 per report delivered by email. Set up at least one cost budget with email alerts on every account.

Do Google Cloud budgets stop spending?

No. Google's docs say an alerts-only budget doesn't automatically cap Google Cloud usage or spending. It sends emails at thresholds (50%, 90% and 100% of the budget by default) and can publish to Pub/Sub. For a hard stop you need a spend cap budget on supported services, or automation that reacts to the Pub/Sub notification.

How current is AWS cost data?

Not real time. AWS says billing information is updated up to three times a day, and Cost Explorer updates your cost data at least once every 24 hours. Checking more often than a few times a day just costs API requests without new numbers. Google Cloud's billing export to BigQuery also loads throughout the day with a delay.